ArchivesCommissioning Process

on

Occupancy Phase Commissioning Process

Share

Occupancy Phase Commissioning Process

Occupancy is the final test that determines whether or not the commissioning program was successful. This test will demonstrate whether or not the systems actually meet the needs of the occupants, in every respect, throughout all modes of operation. This is a difficult request, and in some respects, it may be asking for too much to expect to be successful.

Nevertheless, if each step of the commissioning process has been carried out correctly, there is a good chance that the facility will be a great success, with very few flaws, if any at all, and without a doubt none that are major.

However, one must be careful not to exaggerate the conditions that are to be anticipated prior to the initial occupancy of the building. This is due to the fact that the occasion of occupancy does not represent a completely clean transition from a finished and commissioned building to a completely occupied facility that offers an ongoing environment conducive to business as usual.

Moving into a facility before it has been fully commissioned can be done for a variety of perfectly reasonable reasons.

Even though there may be some activities related to the construction phase that are still being carried out, the occupancy and operation phases typically start once substantial completion has been reached and the building has been turned over to the owner.

All activities that were left unfinished from the construction phase are finished during the Occupancy and Operations Phase. During this phase, long-term processes for ensuring the building’s performance over time are developed and implemented. These activities are known as ongoing maintenance and performance activities.

Pre- and post-occupancy Phase Commissioning Process is a training program that was developed by Krishnaji Pawar, an experienced commissioning specialist who specializes in the development of sustainable design strategies for green building certification systems (LEED, GSAS, etc.), energy and water conservation, commissioning, environmental impact assessment, and environmental management systems. Pawar is also an expert in the field of environmental management systems.

Learning Objectives

  • Learn the pre- and post-occupancy objectives for CxA.
  • Learn more about the CxA Team prior to and after occupancy.
  • Comprehend CxA  activities.
  • Learn about commissioning meetings
  • Operation and Maintenance (O&M) comprehension
  • More information about the Systems Manual
  • Comprehend the Commissioning Report
  • Seasonal or delayed training and examinations
  • Warranty Operations
  • Acceptance Phase Summary
  • Optimization and Modification
  • Monitoring, continuous CxA, and decommissioning.

During the Operations Phase, the CxP’s goals include minimizing contractor callbacks, verifying building systems compliance with the most recent Owner’s Project Requirements (OPR) or Current Facility Requirements (CFR), performing seasonal testing, and completing project documentation such as the Systems Manual and Final Commissioning Report. During this phase, the CxP also strives to ensure that the project is ready for occupancy and operations.

Other Related courses

Building Commissioning Professional – BCxP Exam Question Bank

The BCxP certification program from ASHRAE verifies the ability to lead, plan, coordinate, and manage a commissioning team for the implementation of commissioning processes in new and existing buildings.

Advantages of our simulation exams:

  • You’ll get over 700 questions in 6 mock exams ranging from easy to hard to specialist.
  • Understand each question and answer’s reasoning and related knowledge area to restudy or revise.
  • You will learn building commissioning and terminology.
  • BCxP Exam: Flash Cards (One set of key terminology cards). More than 108 keywords!
  • Professional credibility improved
  • Experience the BCxP Exam.
  • Master situational questions
  • Consider the practise test part of your education..

Even though the 700-question BCxP Practice Exam with key terminology flash cards is extremely useful on its own, the Building Commissioning Professional – BCxP Exam Question Bank will help building commissioning professionals develop a targeted, individualized study plan to achieve their professional development goals.

on

Construction Phase Commissioning Process

Share

Construction Phase Commissioning Process

The construction phase is the third of the four phases that we have identified for the building systems commissioning process. This phase comes immediately after the design phase and comes before the occupancy and operations phases.

During the construction phase, the commissioning plan (Cx plan), which was updated by the commissioning provider (CxP) during the design phase, is implemented. Consistent interaction between the CxP and the construction team, as well as frequent communication between the CxP and the design team, are essential to the construction phase’s success.

The CxP leads both the larger Commissioning Team (Cx Team) and the smaller Commissioning Provider Group (CxP Group) to ensure commissioning activities are completed correctly and on schedule.

During the construction phase, the CxP is responsible for revising the owner’s project requirements (OPR) or current facility requirements (CFR), updating the commissioning plan, reviewing construction submittals for compliance with the OPR or CFR, distributing checklists to contractors, observing building equipment and system installations, and developing and managing various tests.

After equipment and system start-up, which includes installation and acceptance tests and testing, adjusting, and balancing (TAB), the CxP is responsible for coordinating and scheduling functional performance testing (FPT) and integrated systems testing (IST) with the appropriate Cx Team members.

Krishnaji Pawar, an experienced commissioning specialist who specializes in developing sustainable design strategies for green building certification systems (LEED, GSAS, etc.), energy and water conservation, commissioning, environmental impact assessment, and environmental management systems, created the Construction Phase Commissioning Process training program.

Learning Objectives

  • Construction Phase Overview
  • Learn Construction Phase CxA Objectives
  • Understood Construction Phase CxA Team
  • Pre-construction Commissioning Conference
  • Learn more about commissioning progress meetings.
  • Know more about the role of the testing contractor.
  • Update CxA Plan, Schedule, and Review Submittals
  • Understanding Commissioning Test Procedures
  • Learn Construction Phase CxA Activities
  • Resolution Tracking Forms
  • TAB and HVAC Systems
  • Building Automation System (BAS)
  • Lighting Controls: Emergency Power Systems:
  • Developing Functional Performance Tests (FPT’s)
  • Training
  • Operational Sustainability
  • Learn Commissioning Reporting

The construction phase commissioning process training benefits commissioning professionals, building owners, designers, engineers, architects, and sustainability specialists. The commissioning team ensures that equipment, systems, and assemblies are installed, integrated, and operating according to the owner’s project requirements during construction. Functional testing and documentation provide valuable performance benchmarks, acceptance criteria, and a baseline for the future operation and ongoing commissioning of the facility.

Other Related courses

Certified Commissioning Authority – CxA Exam Question Bank

The ACG offers the Certified Commissioning Authority (CxA) certification program to independent building commissioning professionals in order to recognize their competence and encourage their ongoing professional development. The ACG Certification Council administers this program.

Our simulation exams have the following advantages:

  • You will assess your knowledge prior to the final CxA exam.
  • Test questions that are similar to actual exam questions
  • You will have access to more than 700 questions in 6 mock exams that go from easy to medium to hard to expert.
  • Understand the reasoning behind each question and answer and the related knowledge area to be able to restudy or revise.
  • Our simulation exams are considered part of your studies as they cover the CxA Exam Knowledge Domains.
  • You will become familiar with building commissioning and terminology.
  • You will likely pass the exam on your first attempt.
  • CxA Exam: Flash Cards (One set of key terminology flash cards. Over 108+ key terms!
  • The course provider will answer any questions you have.

Even though the 700-question CxA Exam Question Bank with key terminology flash cards is very helpful on its own, the Certified Commissioning Authority – CxA Exam Question Bank will assist commissioning professionals in developing a targeted, individualized study plan to achieve their professional development objectives.

on

Design Phase Commissioning Process

Share

Design Phase Commissioning Process

The design phase is the second of the building systems commissioning process’s four phases that we have identified so far. This phase immediately follows the pre-design phase and comes before the construction phase. Immediately following this phase is the construction phase. It is important to note that the commissioning process for buildings and systems does not identify individual phases of the commissioning process, let alone name them.

If it wasn’t done earlier, during the project’s initiation phase, comprehensive building systems commissioning needs to get started as soon as possible during the design phase. During the design phase of the project, the owner’s investment in the careful planning and preparation performed by the commissioning specialist can result in time and financial savings during later phases of the project.

The commissioning specialist has until the end of this phase to verify that the commissioning plan is complete and up-to-date and that the requirements for the commissioning process of the building systems are correctly documented in the commissioning specification that has been incorporated into the project manual.

It is absolutely necessary to have a commissioning authority (CxA) in order to guarantee the quality of the building commissioning and the construction documents. They are of assistance to the designer in achieving an optimal system design and in making certain that the design concepts meet the performance goals of the owner. CxA places an emphasis on commissionability and functionality while simultaneously attempting to avoid design flaws.

Krishnaji Pawar, an experienced commissioning specialist who specializes in developing sustainable design strategies for green building certification systems (LEED, GSAS, etc.), energy and water conservation, commissioning, environmental impact assessment, and environmental management systems, prepared the design phase commissioning process training.

Learning Objectives

  • Overview of the Design Phase
  • Comprehend the Design Phase Goals
  • Discover the commissioning team.
  • Learn more about activities in the design phase.
  • Comprehend Systems Customarily commissioned
  • Create a plan for commissioning.
  • Prepare specifications.
  • Gain insight into the pre-bid conference.
  • Overview of Project Management
  • A comprehension of the commissioning design review
  • What is the essence of value engineering?
  • Managing Risks
  • Understanding the Report on Design Commissioning
  • Understand the Design Commissioning Report

The design phase commissioning process training course is advantageous for commissioning professionals, building owners, designers, engineers, architects, and sustainability specialists because it emphasizes that the design documentation (plans, specifications, and basis of design) is consistent with each other, includes commissioning requirements, and meets the owner’s project requirements (OPR).

Other Related courses

Associate Commissioning Professional – ACP Exam Question Bank

For individuals who are new to the profession of commissioning or who wish to demonstrate their knowledge of the commissioning process when interacting with commissioning providers or project teams.

Our simulation exams have the following advantages:

  • You will assess your knowledge prior to the final ACP exam
  • Test questions that are similar to actual exam questions
  • You will have access to more than 600+ NEW questions in 6 Practice Tests that go from easy to medium to hard to expert.
  • Understand the reasoning behind each question and answer and the related knowledge area to be able to restudy or revise.
  • Our simulation exams are considered part of your studies as they cover the ACP Exam Knowledge Domains.
  • You will become familiar with building commissioning and terminology.
  • You will likely pass the exam on your first attempt.
  • If you have questions that need more explanation, you can ask the course provider directly, and he will answer as soon as he can.
  • ACP Exam: Flash Cards (One set of key terminology flash cards. Over 108+ key terms!)

Even though the 700-question CCP Practice Exam with key terminology flash cards is very helpful on its own, the Certified Commissioning Professional – CCP Exam Question Bank will help building commissioning professionals make a targeted, personalized study plan to help them reach their professional development goals

on

Pre-Design Phase Commissioning Process

Share

Pre-Design Phase Commissioning Process

The predesign phase of a new building project is often overlooked, leading to informally developed ideas and construction costs. Multiple-facility owners often do better than others in analyzing and documenting their objectives. However, a comprehensive building commissioning quality assurance program is essential for refinement.

Owners should develop a predesign process that establishes communication, decision-making, and documentation disciplines, involving all design and construction phases. Involving the commissioning authority early in the predesign phase increases the value of the process.

Building commissioning, on the other hand, refers to the process of checking to see that all of the building’s systems have been correctly installed and are operating as designed. A visit to the location is frequently required for commissioning.

Krishnaji Pawar, an experienced commissioning specialist who specializes in developing sustainable design strategies for green building certification systems (LEED, GSAS, etc.), energy and water conservation, commissioning, environmental impact assessment, and environmental management systems, prepared the pre-design phase commissioning process training.

Pre-Design Phase Commissioning Process Learning Objectives

  • Benefits of Early CxA Participation
  • Selecting the Commissioning Authority
  • The Advertisement
  • Owner’s Project Requirements (OPR)
  • Commissioning Plan
  • Communications Plan
  • Project Budget
  • Commissioning Authority Agreement
  • Selection of the Design Professional and Agreement
  • Pre-Design Phase Overview
  • Commissioning Meetings
  • Which building systems are to be commissioned?

During the pre-design phase of the project, the objectives of the commissioning specialists include reviewing the draft Owners Project Requirments (OPR) or Current Facility Requirments (CFR), assembling the commissioning team, and confirming with the owner the building systems that need to be commissioned as well as the scope of commissioning services.

In addition, the provider of commissioning services might provide an overview of the commissioning plan and commissioning specifications, both of which are likely to undergo revisions and additions during the design phase.

When developing the project proposal and writing the commissioning plan, it is essential for the commissioning provider to consult the equipment list, which may change over the course of the duration of the project.

The predesign phase is the first of four distinct stages that make up the process of commissioning building systems, as stated in the Commissioning Specialist Manual for Beyond Smart Cities. These stages are listed in the order listed above. This is the first step in the process of commissioning a building’s system, and it comes before the phase in which the design is done.

Other Related courses

Certified Commissioning Professional – CCP Exam Question Bank

The CCP Exam Question Bank has everything you need to pass the CCP exam the first time. This question bank includes an 800 question practice exam as well as key terminology flashcards to help you study in a way that is most beneficial to your professional development. Get your Certified Commissioning Professional (CCP) certification today!

Advantages of our simulation exams:

  • You will have access to more than 840+ questions in 7 practice tests that go from easy to medium to hard to specialist.
  • Understand commissioning terminology and abbreviations.
  • Understand the high-level commissioning procedure.
  • Expand your investigation into the commissioning process.
  • Recognize tactics and make sound decisions.
  • Experience the tension of the genuine CCP Test.
  • Learn how to respond to situational questions.
  • Consider the practice exam to be part of your studies and education.
  • CCP is the first certification recognized under the Better Building Workforce Guidelines.
  • CCP Exam – Flash Cards (One set of key terminology flash cards. Over 108+ key terms!).

Certified Commissioning Professional (CCP)

This ANSI-approved certification is for commissioning providers who lead, plan, coordinate, and manage commissioning teams to put commissioning processes into place in new and existing buildings.

Being a CCP means that you know what’s going on in the constantly changing world of building commissioning. This puts you and your company at the forefront of this growing industry.

on

Building Commissioning & Testing, Adjusting, and Balancing (TAB)

Share

Building Commissioning & Testing, Adjusting, and Balancing (TAB)

Commissioning is the process of guiding the building owner toward the most efficient system and validating that the installation conforms to the required project specifications, which are prepared based on international codes and the Owner’s specifications.

It is also a methodical procedure that facilitates and ensures the necessary communication, coordination, testing, and verification, and results in the delivery of a building with HVAC systems that function as intended. Effective HVAC commissioning requires collaboration and initiative.

It begins with a design review and is followed by functional performance tests, operator and end-user O&M training sessions, and thorough documentation of the entire HVAC system. The primary objective of commissioning activities is to ensure that the facility handed over will be operated and maintained as intended.

Each type of HVAC system is designed to meet specific performance criteria, such as heating-cooling capacity, a specific airflow rate, and ventilation requirements, among others. The process of Testing, Adjusting, and Balancing consists of three steps to verify that the system complies with the design conditions.

Testing is the collection of activities performed with calibrated testing instruments to measure pressure, fluid (air or water) flow, or temperature in order to validate that the equipment or system performance meets the required system performance.

Adjusting refers to the system’s final configuration, such as setting the valves and volume dampers and marking them with permanent markers, adjusting the fan speeds, adjusting the pump impeller sizes, etc.

Using standard procedures, balancing is the methodical process of fine-tuning system fluid (air or water) flow to achieve the desired system performance.

The training on Building Commissioning & Testing, Adjusting, and Balancing (TAB) was developed by an experienced commissioning expert, Krishnaji Pawar, who specializes in developing sustainable design strategies for Green Building Certification Systems (LEED, GSAS, etc.), Energy and Water Conservation, Commissioning, Environmental Impact Assessment, and Environmental Management Systems.

Although exhaustive verification testing of control systems is an essential component of a building that has been fully commissioned, it is not always carried out in every instance.

During this educational Building Commissioning & TAB training, participants will learn about the significance of obtaining complete verification of these vital systems; TAB and its significance; initial testing, adjustment, and balancing; an overview of TAB certification agencies; and how test and balance and commissioning firms can join forces and utilize their combined expertise to carry out the required testing, verification, and documentation.

Energy models help building commissioning optimize HVAC systems, install energy-efficient lighting, and evaluate solar panel performance. Building commissioning and energy modeling should be part of any construction or renovation project.

Learning Objectives

  • TAB and Its Importance
  • HVAC System Commissioning Process
  • What role should TAB play when testing controls?
  • Third-party testing, adjusting, and balancing
  • An Overview of TAB Certification Agencies
  • Initial Testing, Adjustment, and Balancing
  • Summary and Resources
  • Building Commissioning and TAB: Test Your Knowledge!

Other Related courses

Certified Commissioning Professional – CCP Exam Question Bank

Each simulation exam will explain correct and incorrect answers and help students focus on the commissioning process. Our simulation tests get harder from easy to medium to hard to expert.

Advantages of our simulation exams:

  • Before the final CCP exam, you will test your knowledge.
  • Exam-like examinations
  • Five mock exams with over 600 questions range from easy to hard to expert.
  • Understand the reasoning behind each question and answer and the related knowledge area to restudy or revise.
  • Our CCP Exam Knowledge Domain simulation exams count towards your studies.
  • You’ll learn building commissioning terminology.
  • You should pass the exam on your first try.
  • The course provider will answer any questions you have.

Even though the 700-question CCP Practice Exam with key terminology flash cards is very helpful on its own, the Certified Commissioning Professional – CCP Exam Question Bank will help building commissioning professionals make a targeted, personalized study plan to help them reach their professional development goals.

 

on

Commissioning and Measurement & Verification

Share

Commissioning and Measurement &Verification

M&V is the process of measuring and verifying that energy goals for specific projects have been attained. It has become “business as usual” and is frequently required by contract for many utility-sponsored conservation programs and energy performance contracts.

For optimal project outcomes, it appears that the commissioning, measurement, and verification processes should work in tandem. For M&V to serve as a confirmation that energy goals are met, it would be prudent to commission the systems as part of their design and construction. Commissioning contributes to the M&V process by confirming not only that systems physically function properly at the conclusion of construction but also that they will continue to function efficiently throughout their lifetimes.

The training on Commissioning and Measurement and Verification was developed by an experienced commissioning expert, Krishnaji Pawar, who specializes in developing sustainable design strategies for Green Building Certification Systems (LEED, GSAS, etc.), Energy and Water Conservation, Commissioning, Environmental Impact Assessment, and Environmental Management Systems.

Measurement and verification (M&V) is the next-to-last step in the technical commissioning process, which is covered in this course. M&V involves utilizing industry-standard tools and processes to check and ensure that occupied facilities (whether a single building or a group of structures) perform at the owner’s desired level of resource efficiency, and to determine what steps can be taken if the desired level has not been reached.

The Commissioning and Measurement and Verification training program will provide you with the utility strategies, commissioning In ESPC, and integrating the energy savings verification process necessary to develop your skills if you are interested in expanding your knowledge of the commissioning and M&V processes.

This introductory course will use scenarios to demonstrate the similarities and differences between Commissioning and Measurement & Verification (M&V), as well as how the two services can be integrated on projects to maximize building performance. Specific instances will illustrate the application of learning objectives to both new construction and existing building applications.

A building is designed, constructed, and commissioned in accordance with the OPR in the best-case scenario. The owner then takes possession of the building, uses it as it was intended to be used, and enjoys a structure whose performance falls within a range of acceptable OPR parameters. In this situation, the M&V process is little more than an academic exercise that measures and verifies the expected outcome of a successful commissioning process.

Participants will be able to better coordinate Commissioning activities and meet owner expectations for projects with energy performance project requirements as a result of this lesson.

Learning Objectives

  • Introduction and Course Outline
  • Utility Strategies for Energy Efficiency
  • Commissioning In Energy Savings Performance Contracts
  • Why Commission With M&V?
  • Existing Building Commissioning M&V requirements
  • Integrating the Energy Savings Verification Process
  • Summary and Resources

Energy models help building commissioning optimize HVAC systems, install energy-efficient lighting, and evaluate solar panel performance. Building commissioning and energy modeling should be part of any construction or renovation project.

Other Related courses

Certified Commissioning Professional – CCP Exam Question Bank

Each simulation exam will explain correct and incorrect answers and help students focus on the commissioning process. Our simulation tests get harder from easy to medium to hard to expert.

Advantages of our simulation exams:

  • Before the final CCP exam, you will test your knowledge.
  • Exam-like examinations
  • Five mock exams with over 600 questions range from easy to hard to expert.
  • Understand the reasoning behind each question and answer and the related knowledge area to restudy or revise.
  • Our CCP Exam Knowledge Domain simulation exams count towards your studies.
  • You’ll learn building commissioning terminology.
  • You should pass the exam on your first try.
  • The course provider will answer any questions you have.

Even though the 700-question CCP Practice Exam with key terminology flash cards is very helpful on its own, the Certified Commissioning Professional – CCP Exam Question Bank will help building commissioning professionals make a targeted, personalized study plan to help them reach their professional development goals.

on

Commissioning the Building Energy Model

Share

Commissioning the Building Energy Model Training

Building commissioning and energy modeling are two processes that are complementary to one another and work together to optimize the performance of buildings and achieve savings in energy consumption.

Building owners can achieve even greater energy savings and ensure that their building is operating at peak performance by using energy models to identify potential opportunities for energy savings, validate the performance of building systems, and evaluate the performance of the building after the commissioning process has been completed. These three steps make up the energy modeling process.

Optimising heating, ventilation, and air conditioning (HVAC) systems, installing energy-efficient lighting, and evaluating the performance of solar panels are just some specific examples of how building commissioning works best with energy models. As a result of this, building owners should think about including building commissioning and energy modeling in any project involving the construction or renovation of their properties.

Building commissioning, on the other hand, refers to the process of checking to see that all of the building’s systems have been correctly installed and are operating as designed. A visit to the location is frequently required for commissioning.

When these two processes are combined, building owners have the opportunity to realize even greater reductions in their building’s energy consumption and to ensure that their structure is performing at its absolute best. In this class, we will investigate the most effective ways to use energy models for building commissioning, complete with numerous concrete examples.

The Commissioning the Building Energy Model training was prepared by an experienced commissioning specialist—Krishnaji Pawar, who specialises in developing sustainable design strategies for Green Building Certification Systems (LEED, GSAS, etc.), Energy & Water Conservation, Commissioning, Environmental Impact Assessment, and Environmental Management Systems.

Learning Objectives

  • Commissioning the Building Energy Model
  • Building Energy Models: Theoretical or Predicting the Actual?
  • Why do we have a Building Energy Model?
  • Why Commission the Energy Model?
  • Using Energy Models for Building Commissioning
  • Different applications of Building-level models for Commissioning
  • Summary and resources

Although the Commissioning the Building Energy Model is primarily intended for building owners and developers, architects, engineers, and green building consultants may also benefit from taking it. The course’s primary focus is on the advantages of building commissioning and Building Energy modeling. Commissioning and energy modeling are two processes that are complementary to one another and work together to optimize the performance of the building and achieve savings in energy consumption.

Energy modeling and building commissioning work together to improve building performance and save energy. Building owners can maximize energy savings and building performance by using energy models to identify energy savings opportunities, validate building system performance, and evaluate building performance after commissioning.

Energy models help building commissioning optimize HVAC systems, install energy-efficient lighting, and evaluate solar panel performance. Building commissioning and energy modeling should be part of any construction or renovation project.

Other Related courses

Certified Commissioning Professional – CCP Exam Question Bank

Each simulation exam will explain correct and incorrect answers and help students focus on the commissioning process. Our simulation tests get harder from easy to medium to hard to expert.

Advantages of our simulation exams:

  • Before the final CCP exam, you will test your knowledge.
  • Exam-like examinations
  • Five mock exams with over 600 questions range from easy to hard to expert.
  • Understand the reasoning behind each question and answer and the related knowledge area to restudy or revise.
  • Our CCP Exam Knowledge Domain simulation exams count towards your studies.
  • You’ll learn building commissioning terminology.
  • You should pass the exam on your first try.
  • The course provider will answer any questions you have.

Even though the 700-question CCP Practice Exam with key terminology flash cards is very helpful on its own, the Certified Commissioning Professional – CCP Exam Question Bank will help building commissioning professionals make a targeted, personalized study plan to help them reach their professional development goals.

on

Building Enclosure Commissioning 

Share

Building Enclosure Commissioning -BECx

Building Enclosure Commissioning, abbreviated as BECx (sometimes the term “envelope” is used instead of “enclosure”), is a rigorous process with a strong emphasis on quality in which the energy performance of a facility, system, or assembly is evaluated and verified in comparison to predetermined goals and standards.

A commissioning team is responsible for carrying out the process itself. This team employs trustworthy and precise measurements to ensure that the project is satisfying the particular quality requirements that were defined by the owner of the project. The commissioning process starts when the project is first conceived and continues on during the many construction phases. These phases include the pre-design phase, the pre-construction phase, and the construction phase.

Building enclosure commissioning enables a third-party enclosure specialist to represent the best interests of the owner in order to ensure that the performance of the building envelope matches the intent of both the owner and the designer. The additional layer of evaluation carried out during the design, building, and post-occupancy phases of the project gives the entire project team the peace of mind that comes from knowing that the envelope will function as intended.

The Building Enclosure Commissioning Training Course was prepared by Krishnaji Pawar, CEO and founder of Beyond Smart Cities.

This course focuses on building enclosure commissioning, which is essential for sustainable building. It covers the pre-design phase, design phase, building phase, occupancy and operations phases, and owner training and maintenance. The course emphasizes the importance of knowledge and collaboration in building enclosure commissioning, as projects become more complex and less uniform due to unique structures. Building enclosure commissioning is a crucial component of high-performance buildings.Who should attend this Course

Although the primary focus of this course is on the benefits of building enclosure commissioning to building owners and developers, the information presented is beneficial to anyone interested in sustainable building or green building, including architects, engineers, sustainability consultants, and commissioning engineers.

Learning objectives

  • What exactly is meant by the term “building enclosure commissioning”?
  • Establish a clear distinction between building enclosure commissioning and the commissioning of other systems and envelope services.
  • Enclosure of the building, the commissioning process’s goals, and its benefits
  • Explain the goals that should be accomplished through a thorough enclosure commissioning procedure.
  • Appreciate the many benefits that enclosure commissioning offers to the owners of buildings.
  • Explain some standard testing procedures for enclosures.

Building projects in the 21st century face tight budgets, complicated designs, and changing materials. Building Enclosure Commissioning (BECx) is crucial for quality assurance and project success. This course focuses on the process and its benefits for the owner, ensuring the building’s longevity and functionality.Other Related courses

Certified Commissioning Professional – CCP Exam Prep

The Certified Commissioning Professional (CCP) Exam Prep Training is without a doubt the most complete CCP course you can take online. Even if you have zero building commissioning knowledge, this course is right for you.

Key Learning Objectives

  • Learn about commissioning basics and managing commissioning projects.
  • Essential Attributes of BCxA
  • Understanding commissioning and its terminologies
  • Learn about preparing commissioning documentation.
  • Learn about managing training activities, existing CxA, and ongoing CxA.
  • Recognize retro commissioning and key attributes
  • Learn about commissioning high-performance buildings.

 

Certified Commissioning Professional – CCP Exam Question Bank

Each simulation exam will explain correct and incorrect answers and help students focus on the commissioning process. Our simulation tests get harder from easy to medium to hard to expert.

Advantages of our simulation exams:

  • Assessment of knowledge before final exam.
  • Access to over 820+ questions in 7 mock exams.
  • Understanding reasoning behind each question and answer.
  • Simulation exams cover CCP Exam Knowledge Domains.
  • Familiarization with building commissioning and terminology.
  • High chances of passing exam on first attempt.
  • Direct contact with course provider for further explanations.
  • CCP Exam Flash Cards: Over 108+ key terms.
  •  CCP_Engineering and HVAC design Equations.
on

Fundamentals of the Commissioning Process

Share

Fundamentals of the Commissioning Process

This course is designed to help commissioning professionals, including energy managers, HVAC engineers, facility and business managers, industrial engineers, and energy service company professionals, become more aware of and effective at identifying and implementing the best energy management strategies.

The commissioning process is the integrated application of a set of engineering techniques and procedures to check, inspect, and test every operational component of the project—from individual functions such as instruments and equipment, up to more complex entities such as subsystems and systems.

Learn more Commissioning Specialist Services 

The Basics of commissioning process covers the fundamental concepts of commissioning process  for new and existing buildings. You will learn how building systems and assemblies work, how to detect problems, and how to analyse proper building performance.

Step-by-step information on each aspect of a typical new construction commissioning process. We will discuss when and how each step of the process is achieved. Costs and benefits of typical commissioning processes are provided. In this module, participants will learn the fundamentals of building system and equipment operations and describe the various types of building systems and equipment and how these systems operate.

The Fundamentals of the Commissioning Process was prepared by an experienced commissioning specialist, Krishnaji Pawar. specialises in developing sustainable design strategies for Green Building Certification Systems (LEED, GSAS, etc.), Energy and Water Conservation, Commissioning, Environmental Impact Assessment, and Environmental Management Systems.

Learning Objectives

  • Understand commissioning terminologies and abbreviations
  • Understand the high-level commissioning process.
  • Investigate the commissioning process in greater depth.
  • Building commissioning, the commissioning process, and green buildings will be familiar to students.
  • Learners will get the information they need to understand the basics of green building commissioning and implementation.

Building commissioning is a team effort that requires the involvement of numerous stakeholders in the process of delivering a successful building project. Individual roles, most of which, ideally, are assigned at the predesign phase, and continue from inception through occupancy. Designated team members are responsible for specific activities and documents during the various phases.

Other Related courses

Certified Commissioning Authority – CxA Exam Question Bank

Even though the 600-question CxA Practice Exam is very helpful on its own, the Certified Commissioning Authority – CxA Exam Question Bank will help building commissioning professionals make a targeted, personalized study plan to help them reach their professional development goals.

Key Learning Objectives

  • You will have access to more than 600 questions in 5 practice tests that go from easy to medium to hard to specialist.
  • Understand commissioning terminology and abbreviations.
  • Understand the high-level commissioning procedure.
  • Expand your investigation into the commissioning procedure
  • Recognize tactics and make sound decisions.
  • Experience the tension of the genuine CxA test.
  • Learn how to respond to situational questions.
  • Consider the practice exam to be part of your studies and education.

Commissioning LEED Green Buildings

The LEED Green Building Rating System will be introduced, followed by a discussion of how LEED building commissioning may differ from conventional new construction.

Ongoing Commissioning – OCx Best Practices

An Ongoing Commissioning – OCx Best Practices training program tailored to meet facility operational requirements and Ongoing Commissioning (OCx) Identify additional Operations & Maintenance (O&M) personnel training. Understand the value of OCx as a strategy to sustain performance from new and existing Building CX approaches

Advanced Existing Building Commissioning – EBCx

The Advanced Existing Building Commissioning – EBCx training course covers all the stages of the existing building commissioning process, namely: planning, investigation, implementation, handover, and monitoring. These stages are presented in detail to allow trainees to develop a coherent understanding of the entire process and reap all the anticipated benefits.

Certified Commissioning Specialist (CCxS)

This CCxS-accredited certification is intended for commissioning providers who lead, plan, coordinate, and manage commissioning teams in new and existing buildings.

Why Pursue a CCxS Designation?

  • Professional Recognition – This is the proof – the CCxS designation sets you apart as someone with the commitment, dedication, and knowledge to succeed in building commissioning .
  • Verification of your expertise by an independent organisation.
  • Professional growth and development.
  • Enhanced professional credibility.
  • Great job opportunities.